You are watching: What does soda ash do to a pool
How does Soda Ash work?
Na2CO3 + H+ ↔ 2Na+ + HCO3-
Soda Ash + Hydrogen yields Sodium and Bicarbonate
This all ties into the broader discussion about alkalinity and pH. We know in the pool business that alkalinity is a pH buffer, but do we know why? In a less-than-scientific explanation, alkalinity buffers pH by either donating a Hydrogen or absorbing one. Alkalinity makes it more difficult for pH to fluctuate quickly.
Specifically, carbonate ions like to become bicarbonate, and vice versa. When you add Soda Ash to the pool, the carbonate anion (CO32-) wants to become bicarbonate (HCO3-). To do so, it needs to get a Hydrogen (H+) from somewhere. When carbonate takes its Hydrogen atom, the pH goes up. This pH and alkalinity chemistry is about equilibrium, so the opposite is also true. When you add acid to the pool, a Hydrogen is released and the pH goes down. It’s all about the hydrogen ions.
Now that we know what Soda Ash is and how it reacts in water, let’s talk about why it sometimes clouds up a pool.
Rapid pH Change
Related: LSI Balance & Calcium Management (Pillar 1)
The high-LSI violation in a small area is similar to how plaster dust is formed. You know, where calcium hydroxide is stolen by aggressive water from the cement in the surface, but its super high 12.6 pH suddenly changes the LSI in the immediate area near the surface, and calcium carbonate dust (plaster dust) falls out of solution. Go back and try to read that entire sentence in one breath. We believe in you.
There is another way to look at this phenomena of why Soda Ash sometimes clouds up pools. Beyond the LSI violation aspect, the high pH converts bicarbonate ions into carbonate ions. Remember our article explaining alkalinity? It had an alkalinity graph showing how pH determines the type of alkalinity you have. Here is the graph as a reminder:
The pH determines the % and type of alkalinity present. It is an equilibrium, and can fluctuate.
As you can see, the higher the pH, more and more bicarbonate ions convert to carbonate ions. This matters, because calcium has a strong attraction to carbonate ions, which creates calcium carbonate. Once again, calcium carbonate precipitates out of solution and you get cloudiness.
Can carbonate clouding be prevented?
We hope this article helps explain why calcium carbonate clouding sometimes occurs when adding Soda Ash to a swimming pool. If you have had this problem and want more help, contact us directly.BONUS: Neutralize Acid Washes with Soda Ash
Many of the plaster problems we see are from acid washes. Either the exposure technique was sloppy, or the applicators did not properly neutralize the acid when they were done. Perhaps it was not neutralizing fast enough, or enough in general. The issue is many acid washes are neutralized with sodium bicarbonate, not soda ash.
See more: How To Put Air In A Basketball Properly (With Pictures) 5 Steps
As you can see from this chart, muriatic acid is below 1 on the pH scale. And while it is usually diluted about 10:1 with water, it is still very acidic. Neutralizing acid with sodium bicarb, which has a pH somewhere between 8.3 - 8.6, is inadequate. Just look at how much closer bicarb is to 7.0 compared to muriatic acid. Soda ash is between 11.3-11.8 pH, which is somewhere between 1000 and 1200x more basic than bicarb! So when neutralizing muriatic acid, consider using soda ash instead of sodium bicarb.